orbbec.ini 4.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183
  1. ;---------------- Sensor Default Configuration -------------------
  2. [Device]
  3. ; Mirroring. 0 - Off (default), 1 - On
  4. ;Mirror=1
  5. ; FrameSync. 0 - Off (default), 1 - On
  6. ;FrameSync=1
  7. ; Stream Data Timestamps. 0 - milliseconds, 1 - microseconds (default)
  8. ;HighResTimestamps=1
  9. ; Stream Data Timestamps Source. 0 - Firmware (default), 1 - Host
  10. ;HostTimestamps=0
  11. ; A filter for the firmware log. Default is determined by firmware.
  12. ;FirmwareLogFilter=0
  13. ; Automatic firmare log retrieval. 0 - Off (default), or the number of milliseconds between log retrievals operations.
  14. ;FirmwareLogInterval=1000
  15. ; Print firmware log to console when automatic firmware log retrieval is on. 0 - Off (default), 1 - On
  16. ;FirmwareLogPrint=1
  17. ; Is APC enabled. 0 - Off, 1 - On (default)
  18. ;APCEnabled=1
  19. ; USB interface to be used. 0 - FW Default, 1 - ISO endpoints (default on Windows), 2 - BULK endpoints (default on Linux/Mac/Android machines), 3 - ISO endpoints for low-bandwidth depth
  20. UsbInterface=2
  21. [Depth]
  22. ; Output format. 100 - 1mm depth values (default), 102 - u9.2 Shift values.
  23. ;OutputFormat=100
  24. ; Is stream mirrored. 0 - Off, 1 - On
  25. ;Mirror=1
  26. ; 0 - QVGA, 1 - VGA, 4 - QQVGA. Default: Arm - 4, other platforms - 0, -14 1280x720, 15 1280x960,-16 1280x800, -17 640x400 -20 320x200,-21 480x640, -25 960x1280, -26 800x1280,-27 400x640
  27. Resolution=1
  28. ; Frames per second (default is 30)
  29. ;FPS=30
  30. ; Min depth cutoff. 0-10000 mm (default is 0)
  31. ;MinDepthValue=0
  32. ; Max depth cutoff. 0-10000 mm (default is 10000)
  33. ;MaxDepthValue=10000
  34. ; Input format. 0 - Uncompressed 16-bit, 1 - PS Compression,2 - Packed 10-bit, 3 - Packed 11-bit, 4 - Packed 12-bit. Default: Arm - 4, other platforms - 3
  35. InputFormat=3
  36. ; Registration. 0 - Off (default), 1 - On
  37. ;Registration=1
  38. ; Registration Type. 0 - Don't care (default), 1 - use hardware accelaration, 2 - perform in software
  39. ;RegistrationType=0
  40. ; software filter 0-off ,1--on (default)
  41. ;SoftFilter=0
  42. ; Depth Rotate 0-off(default) ,1--on (only atlas device support)
  43. ;DepthRotate=0
  44. ;Read Params (for test only)
  45. ;ReadParams=0
  46. ; dual sensor: 5.96 mm
  47. ;focallength=5.96
  48. ;dual sensor: 0.0052mm
  49. ;dPlanePixelSize=0.113967
  50. ;dPlaneDistance=130
  51. ;dual sensor: 75mm
  52. ;dEmitterDcmosDistance=7.500000
  53. ;dhorizontalFov=0.022600
  54. ;dverticalFov=0.796616
  55. ; Hole Filler. 0 - Off, 1 - On (default)
  56. ;HoleFilter=0
  57. ; White Balance. 0 - Off, 1 - On (default)
  58. ;WhiteBalancedEnabled=0
  59. ; Gain. 0-50 (0 - Auto, 1 - Min., 50 - Max.). Default value is set by firmware.
  60. ;Gain=0
  61. ; Close Range Mode. 0 - Off (default), 1 - On
  62. ;CloseRange=1
  63. ; GMC Mode. 0 - Off, 1 - On (default)
  64. ;GMCMode=0
  65. ; GMC Debug. 0 - Off (default), 1 - On
  66. ;GMCDebug=1
  67. ; Depth Auto Gain Region-of-Interest. Default values are set by firmware.
  68. ;DepthAGCBin0MinDepth=500
  69. ;DepthAGCBin0MaxDepth=800
  70. ;DepthAGCBin1MinDepth=1500
  71. ;DepthAGCBin1MaxDepth=1800
  72. ;DepthAGCBin2MinDepth=2500
  73. ;DepthAGCBin2MaxDepth=2800
  74. ;DepthAGCBin3MinDepth=3500
  75. ;DepthAGCBin3MaxDepth=3800
  76. ; Wavelength Correction Mechanism. 0 - Off (default), 1 - On
  77. ;WavelengthCorrection=1
  78. ; Wavelength Correction debug info. 0 - Off (default), 1 - On
  79. ;WavelengthCorrectionDebug=1
  80. ; Cropping mode. 1 - Normal (default), 2 - Increased FPS, 3 - Software only
  81. ;CroppingMode=2
  82. ; Cropping area
  83. [Depth.Cropping]
  84. OffsetX=0
  85. OffsetY=0
  86. SizeX=320
  87. SizeY=240
  88. ;Enabled=1
  89. [Image]
  90. ; Output format. 200 - RGB888 (default), 201 - YUV422, 202 - Gray8 (2.0 MP only), 205 - YUYV
  91. ;OutputFormat=201
  92. ; Is stream mirrored. 0 - Off, 1 - On
  93. ;Mirror=1
  94. ; 0 - QVGA (default), 1 - VGA, 2 - SXGA (1.3MP), 3 - UXGA (2.0MP), 14 - 720p, 15 - 1280x960
  95. Resolution=1
  96. ; Frames per second (default is 30)
  97. ;FPS=30
  98. ; Input format. 0 - Compressed 8-bit BAYER (1.3MP or 2.0MP only), 1 - Compressed YUV422 (default in BULK), 2 - Jpeg, 5 - Uncompressed YUV422 (default in ISO), 6 - Uncompressed 8-bit BAYER (1.3MP or 2.0MP only), 7 - Uncompressed YUYV
  99. InputFormat=5
  100. ; Anti Flicker. 0 - Off (default), 50 - 50Hz, 60 - 60 Hz.
  101. ;Flicker=50
  102. ; Image quality when using Jpeg. 1-10 (1 - Lowest, 10 - Highest (default))
  103. ;Quality=10
  104. ; Cropping mode. 1 - Normal (default), 2 - Increased FPS, 3 - Software only
  105. ;CroppingMode=1
  106. ; Cropping area
  107. [Image.Cropping]
  108. ;OffsetX=0
  109. ;OffsetY=0
  110. ;SizeX=320
  111. ;SizeY=240
  112. ;Enabled=1
  113. [IR]
  114. ; Output format. 200 - RGB888, 203 - Grayscale 16-bit (default)
  115. ;OutputFormat=203
  116. ; Is stream mirrored. 0 - Off, 1 - On
  117. ;Mirror=1
  118. ; 0 - QVGA (default), 1 - VGA, 2 - SXGA(1.3MP), 4 - QQVGA. -14 1280x720, 15 1280x960,-16 1280x800, -17 640x400 -20 320x200,-21 480x640, -25 960x1280, -26 800x1280,-27 400x640
  119. Resolution=1
  120. ; Frames per second (default is 30)
  121. ;FPS=30
  122. ; Cropping mode. 1 - Normal (default), 2 - Increased FPS, 3 - Software only
  123. ;CroppingMode=1
  124. ; Cropping area
  125. [IR.Cropping]
  126. ;OffsetX=0
  127. ;OffsetY=0
  128. ;SizeX=320
  129. ;SizeY=240
  130. ;Enabled=1